Design modification and design deviation

(1)由于該花型的循環大于印花滾筒圓周，所以必須按比例縮小花型循環的尺寸。

Owing to the design repeat bigger than the circumference of the printing roller, it is neccessary to reduce the size of your design repeat proportionally.

(2)因為貴方的來樣太小，花型不全，請另行提供花型完整的樣品。

Since your samples are too small to show complete pattern, you are requested to provide us with designs in full repeat.

(3)經告之工廠不接受這一花型，因為它的尺寸是24"，而工廠只能接受不超過18"的花型循環。

We are advised that the size of the design repeat is about 24" which is not acceptable to your mills who are only in a position to take a design repeat in a size not bigger than 18".

(4)花型中的小點子須做適當的放大。

The minute dots in the design should be appropriately enlarged.

(5)經研究該花型，我們工廠建議花型中的留白須用地色代替，方能有更華美的外觀和更好的印花效果。

Having discussed the design,our mills suggest that the remaining white be replaced by the ground colour so as to obtain more attractive appearance and better printing effect.

(6)按我們的理解是，點子、花朵和另瓣的顏色均應換成白色，而葉脈和花朵的勾線（或輪廓線）仍保持原來的黑色。

To our understanding, colours of the spots, flowers and leaves are to be changed into white, while the veins and the outlines of flowers will remain black as they are.

(7)我們工場的意見是，花樣內的涂料白點以留白代替。

For the white dots in the design tinged with pigment, our manufacturer's idea is to replace them by remaining white.

(8)貴方提供花樣需用防拔染生產，不適合做樹脂處理，如貴方仍要此花型，請授權我方改為直接?。ㄌ子。?，或另寄花樣來代替。

Your design requires discharge and resist printing because it is mot applicable to goods to be resined. We request that this, if still needed, be produced with your authorization by over-printing, or be replaced by a new one.

(9)鑒于工藝上的原因，我們已授權工廠將褐色條子花型改為點子花。

On account of technological reason, we have authorized our mill to change the brown stripes into spots.

(10)我們認為在醬色底上印黑花不美觀，特擬定稍微修改，以獲得更好的效果。

We think that black flower on maroon ground cannot constitute an attractive design, a slight modification will be made to achieve a better effect.