Expressions on dyeing/printing process
(1)經研究證明該花樣所用染料與一般的不同，這就是說，以上花樣需用特殊染料印制。
A scrutiny reveals that the dyestuffs applied to the design are different for the ordinary ones, i.e. special dyestuffs are required for printing the design.
(2)由于各個工廠的印花技術與設備不同，這就不可能使產品顏色完全與原樣相同。
Since the printing technology and equipments of the mills are different form one another, it is impossible to have the goods turned out in colours exact to those of the original samples.
(3)即使同一工廠生產自己過去供應的同一花型的貨物，新老產品之間也會出現色差，因為要完全相同，在實際上是不可能的。
Even though the same mill produces goods in the same design as what they supplied in the past, there may be still colour deviation between the new products and the previous ones because exactness in practically impossible.
(4)由于貴方花樣是太青底色，成本較高，我們不得不采用活性染料做近似色來代替。
Since your design is in turquoise ground colour which is rather expensive, we have to use the reactive dyes for making similar colour as a substitute.
(5) 花型循環的尺寸必須按比例縮小。
The size of your design repeat has to be reduced proportion.
(6)由于黑色與太青色是相互矛盾的，工藝上無法相配，我們將以活性染料近似色代替太青，盡可能把顏色做得接近。
Being antagonistic to each other, the black and the turquoise cannot be matched technologically. We shall use reactive dyes to produce a colour other than than the turquoise, but as near the turquoise as possible.
(7)經審樣之后，我們工廠認為已完全了解貴方要求，無須再回寄紙樣供貴方確認。
Our mills don't think it necessary to send you counter sketches for your approval, because they have fully understood the requirement after examining your samples.
(8)貴方花樣應分別注明號碼，以便今后訂購時飲用。
Your design samples should be numbered respectively, so that they can be readily referred to for your orders to come.
(9)用絲網印法來印制這類直條花樣，在接板時有困難。
It is difficult to keep a good connection between stencil frames when these vertical stripes are printed by screen printing.
(10)從來函中洽悉，貴方不愿寄給我方新花型做為代替。因此，我們將樂于收到貴方的搭配更改，請速寄給我們，以使工廠早日投產。
We have noted form your letter that you would not send us a new design for replacement. Hence, it will be our pleasure to receive your amended assoutment, which please despatch immediately, so as to enable the mills to start the production at an early date.
